8 mm thick Tufted Cut Pile carpet has 9 vibrant colours
ROYAL W8 Specifications | ||
Construction | 1/10’’ Tufted Cut Pile | |
Yarn Composition |
100% Solution Dyed Heatset Polypropylene
|
|
Tufted Pile Weight | Ca. 900 g/m² (26.5 oz/yd²) | |
Total Weight | Ca. 1700 g/m² (50 oz/yd²) | |
Pile Height | Ca. 8 mm (+/-5%) | |
Total Height | Ca. 9 mm (+/-5%) | |
Stitch Rate | 33 per 10 cm | |
Density | 138,600 tuffs/m² | |
Standard Roll Size | 3.66 m x 30 m | |
Performance | (as tested by ITTS Inc. USA) | |
Static Control | Pass – Max. 4 kV (AATCC 134-1996) | |
Tuft Bind | Pass – 3.1 lbs (ASTM-D-1335) | |
Dimensional Stability | Pass – Max. 0.1% change (AACHEN) | |
Flammability | ||
– Pill Test | Pass – 8 (ASTM-D-2859-96) | |
– Smoke Density | Pass – Max. 450 (ASTM-E-662-06) | |
Colourfastness | ||
– to light | Excellent – 5 (AATCC-16E) | |
– to wet & dry crocking | Excellent – 4.5 (AATCC-165) | |
– to Ozone | Excellent – 5 (AATCC-129) | |
Lifetime Antishock Carpet Warranty | ||
Ideal for Residential, Hospitality and Light Commerial Use. | ||
The subfloor should be dry, smooth, flat, dust-free and resistant to compression and load-bearing. Where seaming is necessary, a seam sealant must be used for all such installations. Due to dye lot variations, actual material may vary slightly from the samples. Chair pads are recommended to prevent premature wear of carpet. |