MEL-6 Carpet Planks

 

MEL-6 Specifications

Contruction1/10” Level Loop Pile
Yarn Composition100% Solution Dyed Olefin
Tufted Pile WeightCa. 542 g/m² (16 oz/yd²) (+/- 10%)
Total WeightCa. 3600 g/m² (105 oz/yd²)
Pile HeightCa. 3 mm (+/- 0.5 mm)
Total HeightCa. 5 mm (+/- 0.5 mm)
Stitch Rate11 per inch
BackingECO Back – “PVC Free”
Plank Size25 cm x 100 cm
Packing20 pcs per box (5 m²)
Performance(as tested by ITTS Inc. USA)
Stain Resistance10 (AATCC-175-2003)
Static ControlPass – Max. 4 kV (AATCC-134-1996)
Tuft BindPass – 8.8 lbs (ASTM-D-1335)
Dimensional StabilityPass – Max. 0.1% change (AACHEN)
Indoor Air Quality (V.O.C.)Pass – No VOC Detected (ASTM-D5116-10)
Impact Noise RatingΔL: 26 dB (ISO 10140)
Sound Absorptionαw 0.20 (ISO 354)
Hz 125 250 500 1000 2000 4000
αs 0.01 0.03 0.08 0.28 0.35 0.43
Flammability
– Radiant PanelPass – Class I (ASTM-E-648-06)
– Pill TestPass – 8 (ASTM-D-2859-06)
– Smoke DensityPass – Max. 450 (ASTM-E-662-06)
Colourfastness
– to lightExcellent – 5 (AATCC-16E)
– to wet & dry crockingExcellent – 5 (AATCC-165)
– to ozoneExcellent – 5 (AATCC-129)
Lifetime Anti-shock Carpet Warranty
Ideal for Medium Contract Use.
The subfloor should be dry, smooth, flat, dust-free and resistant to compression and load-bearing. Where seaming is necessary, a seam sealant must be used for all such installations. Due to dye lot variations, actual color may vary slightly from the samples. Chair pads are recommended to prevent premature wear of carpet.
Environment
The design and production of MEL-6 Tile conforms to the ISO 14001:2004 Environmental Management System and complies with environmental regulations.

As a responsible manufacturer and to minimize our carbon footprint, a majority of our excess production materials are recycled in-house resulting in a minimum of 10% recycled content in our tile backing. MEL-6 Tile does not contain any PVC in its manufactured materials and packaging.

MEL-6 Tile is an environmentally friendly “green” carpet